Wotofo Profile 1.5 RDA
The Profile 1.5 RDA is the improved version of the rebuildable dripping atomizer by Wotofo. This dripper has a diameter of 24mm and a single coil deck. It also features adjustable airflow and an 810 drip tip. If you would like to use mesh coils, we suggest you use this dripper on a bottom feeder (‘squonker’).
Profile 1.5 Mesh RDA
extra 810 drip-tip
jig to bend the mesh coil
Bottom Feeder (BF) squonk pin
3x Wotofo NexMesh Coils ( nexMESH CHILL A1 0.15ohm, nexMESH TURBO A1 0.13ohm and nexMESH EXTREME A1 0.16ohm)
If you are using mesh coils, it is important to use plenty of cotton under the mesh. This way you will minimize the chance of dry-hits.
How often you need change your wick depends on your vaping habits. The e-liquid that you use also play a role. As a rule of thumb, you might have to change the wick after vaping 50ml of e-liquid. You can typically change the cotton three or four times, before you also need to change the mesh coil.
Vapers typically use this dripper with mesh coils. These coils have a very low resistance, much lower than 1.0ohm. We would like to remind you that you should only use Sub-ohm tanks and coils with devices and batteries that support them. The mod of this starter-set is suitable for low-resistance coils, as long as you use the right batteries.
Do you have any questions or doubts about this product? Would you like to know about compatibility issues with other devices? Do not hesitate to get in touch with us. You can find our contact information here.