JustFog Q16 Kit


The JustFog Q16 Kit is a starter set consisting of a JustFog J-Easy 9 battery and a 2ml JustFog Q16 clearomizer, which features adjustable air flow.



JustFog Q16 Kit

The JustFog Q16 Kit is a starter-set consisting of a JustFog J-Easy 9 battery and a JustFog Q16 clearomizer. The Justfog Q16 clearomizer has adjustable air flow and uses JustFog OCC coils, which are available with 1.2ohm or 1.6ohm resistance. The JustFog Q16 starter-set is the ideal choice for light and medium smokers (e.g., less than fifteen cigarettes a day) who are interested in switching to vaping.


Features of the JustFog J-Easy 9 battery

The JustFog J-Easy 9 battery is a variable voltage battery with 900mAh capacity. This battery features undercharging, overcharging and short circuit protection. The selected voltage and remaining battery charge can be easily read off the screen. You can charge the battery via the Micro-USB port.


Features of the Justfog Q16 clearomizer

The Justfog Q16 clearomizer is a 2ml bottom-fill tank. It measures 16mm in diameter and features adjustable air flow and a replaceable JustFog Q16  glass. This clearomizer uses JustFog OCC coils, which are made with Kanthal wire. These coils are available with 1.6ohm and 1.2ohm resistance. The 1.6ohm coils are meant for Mouth-to-Lung (MTL) vaping. The 1.2ohm coils are also suitable for restricted lung inhale. The drip tip can be customized, thanks to the standard 510 drip tip connection.


Instructions for the JustFog Q16 Kit

You can switch the device on and off by pressing the main button 5 times. To adjust the voltage, simply press on the longer button located under the leds. To refill the clearomizer or change the coil, unscrew the tank from the battery, hold it upside down and unscrew the base. You can refill the tank by letting e-liquid flow along the side of the glass. If you need to change the coil, simply unscrew the old coil and insert a new one.



– JustFog J-Easy 9 battery
– JustFog Q16 Clearomizer
– 2x JustFog OCC coils with 1.6ohm resistance.
– Micro-USB charging cable


Our tips

Only use wall adapters with an output of 1A or lower. The Justfog Q16 clearomizer  works best with 50%PG/50%VG e-liquid.

You should prime each coil with 15-20 drops of e-liquid before its first use. Make sure you always have enough e-liquid in your tank. If the coil gets dry, the cotton might burn and become unusable. Depending on your vaping habits and the kind of e-liquids you use, each coils should last you anywhere from 1 to 3 weeks.

This product is part of the JustFog Q16 collection. You can find all compatible parts and accessories on the relevant page.

Do you have any questions or doubts about this product? Would you like to know about compatibility issues with other devices? Do not hesitate to get in touch with us. You can find our contact information here.

Additional information


, ,





Starter Sets collection


There are no reviews yet.

Be the first to review “JustFog Q16 Kit”

Your email address will not be published. Required fields are marked *

Post comment

Questions about JustFog Q16 Kit

There are currently no frequently asked questions.